PHILIPS MAS100/37
Instrukcja Serwisowa

2-3

2-3

DISMANTLING INSTRUCTIONS

Dismantling the 3CDC Module 1) Loosen the 4 screws, slide Cover top (pos 30) towards the rear and remove it upwards. 2) Loosen 3 screws slide the Panel right (pos 26) towards the rear and remove it outwards. Do likewise for the Panel left (pos 27). 3) Push the gear slowly towards the front as shown in figure 3 until the CDC tray starts to move out of the Front Cabinet (pos 8). The CDC tray is now disengage and can be pulled out completely. 4) Remove the Cover Tray (pos 29) as shown in figure 2. 5) Loosen 4 screws A to remove the CDC Module (pos 28) as shown in figure 1.

Figure 2
A

Dismantling of the Panel Rear
A

1) Loosen 6 screws C on the Panel rear (pos 24). 2) Press the 2 catches C1 inwards and dismantle the Panel rear by pulling it towards the rear.

A

Turn the Gear towards the Front till the CDC Tray starts to open

Figure 1

C1

2 Pull Rear Panel out

1 Press Inwards

Figure 3