Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Clock/Timer
Setting the timer
MICRO SYSTEM MC108
iR
� The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time. The clock time needs to be set first before the timer can be used. � If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically.
1 2
AUX-IN
In any mode, press TIMER (on the remote control) for more than 2 seconds. Press ¡1 / 2� (or CD / TUNER on the remote control) to select sound source. Press TIMER to confirm your desired source. � The clock digits for the hours flash. Press ¡1 / 2� to set the hours. Press TIMER again. � The clock digits for the minutes flash. Press ¡1 / 2� to set the minutes. Press TIMER to confirm the time. � The timer is now set and actiated. Note: - If source CD is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.
3 4 5 6 7
Setting the clock 1
In Standby mode, press PROG/CLOCK button. � The clock digits for the hours flash. Press ¡1 / 2� to set the hours. Press PROG/CLOCK again. � The clock digits for the minutes flash. Press ¡1 / 2� to set the minutes. Press PROG/CLOCK to confirm the time. Note: � If the clock has not been set, --:-- will be displayed.
2 3 4 5
Activating and deactivating TIMER
� In standby or during playback, press TIMER once. � Display shows if activated, and disappears if deactivated.
