Glossary 39
AUDIO In Jack: jack on the front of the TV/VCR that receives audio from other equipment. Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) v/w button, you only scan through channels you receive. Auxiliary (AUX): The channel to which you set your TV/VCR during dubbing or when viewing material that is playing on another device that is connected to the TV/VCR (for example, a Camcorder or VCR). The auxiliary (or line input) channel is always channel 00 (AUX). Bands: settings that allow you to tune channels. � Antenna � VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69). � Cable � standard channels 1-125 can be received without a Cable Box. Bright: adjusting increases or decreases the brightness of the color on the screen. Color: adjusting pales or brightens the picture color. Contrast: the distinction between the black and white parts of the picture. Dubbing: copying a tape using a separate VCR. HQ: high quality; a circuitry feature that improves picture detail. Mode: a TV/VCR operation. OTR: One-Touch Recording; a timed recording that starts immediately and records for 30 minutes to eight hours, whichever you specify. Sharpness: adjusting softens or clarifies the picture on the screen. Tape Speeds: how fast the tape travels during playback or recording. � SP (standard play) � fastest tape speed (recording time for a T120 tape is approximately two hours); best picture quality. � LP (long play) � average tape speed; playback only. � SLP (super long play) � slowest tape speed (recording time for a T120 tape is approximately six hours). Allows the most recording time to fit on a videotape. Tint: adjusting changes the tints of the picture from red/purple to yellow/green. VIDEO In Jack: jack on the front of the TV/VCR that receives video from other equipment.
