PHILIPS MC-70/33
Instrukcja Obsługi

Basic Functions
Notes: � When the power is turned on, the disc tray may open and close to initialise the system. � If you do not complete Plug and Play installation, Plug and Play will be reinitiated the next time you turn on the power. � If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" will be displayed. � During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode automatically. In Eco Power Standby mode G Press ECO POWER. � The system will switch to last selected source. G Press CD 123, TUNER, TAPE or AUX/CDR on the remote control. � The system will switch to the selected source.

Switching the system to Standby mode
In Demonstration mode G Press and hold DEMO STOP on the system. In any other source mode (except Eco Power Standby mode) G Press STANDBY ON (or B on the remote control). � The clock will appear on the display when the system is in Standby mode.

Demonstration mode
The system has a demonstration mode that shows the various features offered by the system. To activate the demonstration G In Standby mode, press and hold DEMO STOP on the system until "DEMO ON" is displayed. � The demonstration will begin. To deactivate the demonstration G Press and hold DEMO STOP on the system until "DEMO OFF" is displayed. � The system will switch to Standby mode. Note: � Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again.

Switching the system to Eco Power Standby mode (< 1 Watt)
G Press ECO POWER (or press and hold B on the remote control). � "ECO PWR" will be displayed, then the display screen will go blank. � The low power ECO POWER LED will be lighted. Note: � If you have not deactivated the demonstration, it will resume five seconds after the system switches to Eco Power Standby or Standby mode.

Switching the system on
In Standby/Demonstration mode G Press STANDBY ON. � The system will switch to the last selected source. G Press CD 1�2�3 (CD 123), TUNER, TAPE, AUX/CDR. � The system will switch to the selected source. G Press any one of the disc CD OPEN�CLOSE (CD10 / CD20 / CD 30) button. � The system will switch to CD mode.

Power Saving Automatic Standby
As a power-saving feature, the system will automatically switch to Standby mode if you do not press any buttons within 30 minutes after a disc or tape has stopped playing.

13
pg 001-029/MC50-70/22-Eng 13 3/7/01, 2:23 PM

3139 115 20742

English