jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
3-2
3-2
Dismantling of the Front Panel assembly
1) Loosen 4 screws C in figure 7 to remove the ETF8 Module. 2) Insert a strong string into the slot between the Jog knob (pos 136) and Cover control (pos 137), looped it until it engage into both the U-slot of the Jog knob and pulled it out as shown in figure 6. 3) Loosen 4 screws D to remove the Display Board assembly.
Dismantling of the Bottom assembly
1) Loosen 1 screw H as shown in figure 9 to remove the Combi board assembly. 2) Loosen 1 screw J and uncatch Shield Transformer (pos 269) from the Bottom plate (pos 265) as shown in figure 11 to remove it. 3) Loosen 4 screws K mounting the Mains Transformer (pos 5001) to remove the Mains Board & Transformer assembly. 4) Loosen 4 screws L to remove the Fan (pos 267). Note: During Fan replacement care should be taken to ensure that the following are correct: - fan blades direction - fan wire position
figure 9
figure 6
figure 7
Dismantling of Rear Panel
1) Loosen 3 screws E and 2 catches C3 to remove the Tuner Board assembly. Note: Tuner Board assembly can also be remove together with the Panel Rear. 2) Loosen 1 screw F and the 2 catches C4 to free the Mains socket board from the Panel Rear (pos 256). 3) Loosen 5 screws G and 2 catches C5 to remove the Panel Rear (pos 256) by sliding it out towards the rear.
