THIS HAPPENS...
The CONV Indicator Light will come on and the Display will show �0OO:OO:�
The Display will show the numbers you touched in the order you touched them. This example shows 90 minutes. 2. Touch the Number Pads for the desired cooking tme.
NOTE: The oven will automatically page 31 if a different temperature
cook at the preset is desired.
temperature
of 375°F. See �Using Temp Reset,�
m
The PREHEAT and CONV Indicator Lights will come on and the Display will show �PREH:� START. When the oven temperature reaches 15O�F,the Display will show the internal oven temperature for every 5°F increase. After the oven temperature has reached the temperature you selected, the oven beeps twice and the PREHEAT Indicator Light goes off. The set temperature will stay on the Display and the oven will hold that temperature up to 30 minutes, or until the food has been placed in the oven and START has been touched. NOTE: The oven will automatically shut off and the Display will show the time of day if food has not been placed in the oven within 30 minutes.
3. Touch
4. Place food in oven. Close the door.
The Display will show the programmed cooking time.
The Display will count down the cooking time to show how much time is left inthecooking cycle. 5. Touch START again. When the Bake Time cycle ends, �End� will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) �End� will remain on the Display and a beep will sound every 60 seconds [to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The display will then show the time of day. The fan will continue to run until interior oven parts have started to cool. 27
