PHILIPS MC-M570/33
Instrukcja Obsługi

Tuner Operations
Selecting a preset radio station
q In tuner mode, press í or ë.
� The preset number, radio frequency, and waveband are displayed.

Changing tuning grid (not available for
all versions) In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz.

E n g l i s h

Deleting a preset radio station q Press and hold �until �PRESET DELETED� is displayed.
� The current preset radio station will be deleted. � All other preset radio stations with higher numbers are decreased by one.

IMPORTANT!
Changing the tuning grid will erase all previously stored preset radio stations.

1

� �

2

� �

2

1 Disconnect the system from the AC power
supply (pull out the AC power cord).

2 While holding down TUNER and á on the
main unit, reconnect the system to the AC power supply.
� The display will show "GRID 9" or "GRID 10". Notes: � GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively. � The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.

20