Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 44 (kliknij aby zobaczyć)
Removing Clogs
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged. � Check the hose area. � Remove extension hose by grasping the hose collar, twisting, and pulling straight off. � Visually inspect the hose and the base area into which the hose is connected. � Remove any visible clog. � Re-connect the extension hose to the dust bin port assembly. � Plug in the vacuum cleaner and turn it on.
Secondary Filter
Filtre secondaire Malla secundaria
� Stretch the hose to maximum length and then allow the hose to return to its storage length. � Turn the unit off and unplug the unit. � Remove dust bin and check dust bin port and secondary filter for clogs. � If the dust bin and filter areas and the hose areas are free of clogs, check the nozzle area. � Return the vacuum cleaner to the upright position before plugging into an electrical outlet.
