WHIRLPOOL MDB6000AWW
Instrukcja Obsługi

eoe_oeeeeoeeeeOeeoeIeeteOeeeeQoeeOee_eoeOeaeeOe__ee_eeeeee_eeeoeeeeeeeeeeoeeeeee_

Pots & Pans provides additional heated dry time. The Pots & Pans option does NOT add heated dry time in Quick Wash/Rinse. Note: Use Pots & Pans to aid in the removal of I

Note: Use this option if the incoming wate perature is below 120°F due to other demand as showers and laundry. Temp Sense OFF cancels the water temperatur Heated Dry ON improves in the main wash and rinse. drying results by tu the heating element during the dry portion of tit Heated Dry OFF turns the heating element el the dry portion of the cycle. Towel drying of sol may be necessary with this selection and more 1 may be noticed on the dishwasher interior. Note: With either dry option, it is normal to vapor coming out of the _,ent area.

and to boost drying, tough, difficult food soils (such as Starches and fats) I ,i Pots & Pans OFF cancels the water temperature checks and the additional heated dry time. Temp Sense ON ensures proper water temperature in the Normal, Light, and China/Crystal cycles. If necessary, the cycle is extended until proper water temperature is reached. When either the wash or rinse portions of the cycle is being extended, the HEATING DELAY light is illuminated.

Operating
[]

"tips

ioe

oeoe

eeeoeee

oe

Deoeeoeoeoeee

oee

ooeeoeeeoDeeooeel

Starting The Dishwasher
After loading the dishwasher and adding detergent, set the control knob to the desired cycle and press the appropriate option button(s). Note: Light, ]Run line [] ::: : When the control knob is set at Normal or Intelliclean ON should be selected. the water from the hot water tap to clear the of cold water before starting.

Adding a Forgotten Item
For best cleaning, the forgotten item should 1: early in the cycle. [] [] [] [] [] Unlatch the door. Wait for the water circulation to stop. Open the door and add the item. Close and latch the door. The cycle resumes automatically.

.......

Press the door until it latches. The cycle will begin with a drain prior to fill.

I

Note: Water heating and dry options can be used separately or together. To make a selection, press the sponding on/off button.

Indicator Lights
........ Delay Start illuminates when this option is selected. The light stays on until the start of the cycle, Smart Sensor illuminates after the prerinse and prewash in the IntelliClean _M cycle option. During this time, the dishwasher will either hold or drain it's present water fill. Clean illuminates at the end of the dry cI remains lit until the control knob has been r advanced to OFF. _ Heating Delay illuminates to indicate that 1 is being extended to heat the water to the proI perature. The location of the _ symbol aro control knob corresponds to the heating delay of the cycle.

: :_: : :: ....