SONY MDS-JA30ES
Instrukcja Obsługi

Editing Recorded MDs

3 4

Turn AMS until �Nm In ?� appears in the display, then press AMS. Turn AMS to select �Disc� to label an MD, or to specify the track to label, and press AMS. A flashing cursor appears in the display.

If you entered the wrong character
Press 0 or ) until the character to be corrected starts flashing, and repeat Steps 6 and 7 to enter the correct character.

To erase a character
Press 0 or ) until the character to be erased starts flashing, then press EDIT/NO.

To enter a space
Press AMS or ) while the cursor is flashing.

5

Press DISPLAY/CHAR to select the character type as follows: To select
Uppercase letters Lowercase letters Numbers

9

Press YES. This completes the labeling procedure and the title appears in the display.

Press DISPLAY/CHAR repeatedly until
�A� appears in the display �a� appears in the display �0� appears in the display

To cancel labeling
Press p. Note
You cannot label a track or an MD while you are recording over an existing track.

A

Copying a track or disc title 6
Turn AMS to select the character. The selected character flashes. Letters, numbers, and symbols appear in sequential order as you turn AMS. You can use the following symbols in titles: ! �#$%&�()*+,�./: ;<=>?@_` You can copy a track or disc title to use it as a title of another track or the disc title within a disc. Note that you can do this operation by using the controls on the deck only.

1 2 3 4

Press EDIT/NO. Turn AMS until �Name ?� appears in the display and press AMS. Turn AMS until �Nm Copy ?� appears in the display. Press AMS. Turn AMS to select �Disc� to copy the disc title, or the track whose title you want to copy and press AMS.

D

You can press DISPLAY/CHAR to change the character type at any time during Step 6 (see Step 5).

5

7

Press AMS to enter the selected character. The cursor shifts rightward and waits for the input of the next character.

If �No Name� appears in the display
The disc or the track has no name.

6
D

Turn AMS to select �Disc� for disc title or to specify the track number to copy a title, and press AMS. �Complete!!� appears for a few seconds to indicate that the copying operation is completed.

8

Repeat Steps 6 and 7 until you have entered the entire title.

To cancel title copying
Press EDIT/NO or p.

34EN