WHIRLPOOL MER4530AAW
Instrukcja Obsługi

Clock and Timer Control (select models) HOUR I--It--I.
+

CLOCK Q

I. nn

t-'-"-'
NOTE: The display will flash when the appliance is first connected to power or if power is interrupted. The display will stop flashing once the time-of-day clock has been set.

Setting the Clock
1. Press the CLOCK pad. 2. Press and hold the HOUR pad to set the correct hours. To change the time by a single hour, give the pad a short tap. 3. Press and hold the MIN. pad to set correct minutes. To change the time by a single minute, give the pad a short tap. For example: To set the clock for 3:15, press and hold the HOUR pad until 3 appears in the display. Then press and hold the MIN. pad until 15 appears in the display, 2. To set timer for less time, press the TIMER pad, then press and hold the MIN. pad until the desired time appears in the display. 3. To set the timer for more than one hour, press the TIMER pad, then press the HOUR pad. 1:59 will appear in the display. � Press the MIN. pad until the desired minutes appear in the display. When the time has elapsed, 0:00 will appear in the display and continuous beeps will sound. Press the CLOCK pad to cancel the beeps. The current time of day will reappear in the display.

Setting the Timer
The timer can be set from one minute (:01) up to 1 hour and 59 minutes (1:59). Time will be displayed in minutes and not in seconds. 1. Press the TIMER pad. � :59 (or one hour) will appear in the display. � The timer will automatically begin counting down in increments of one minute. The colon will flash.

To cancel the timer: Press the CLOCK pad and the display will return to the current time of day.

6