Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
Oven Light ACAUTIONS:
. Disconnect power to range before replacing light bulb. . Use a dry potholder to prevent possible harm to hands when replacing bulb. . Be sure bulb is cool before touching bulb. � Donottouchhotbulbwithadampclothasthismaycause the bulb to break.
Storage Drawer ACAUTION:
� Do not store plastic, paper products, food or flammable materials in this drawer. The drawer may become too warm for these items when the oven is in use. The storage drawer can be removed to allow you to clean under the range. To remove: 1. Empty drawer and pull out to the first stop position.
To replace oven light bulb: 1. When oven is cool, hold bulb cover in place, then slide wire retainer off cover. NOTE: Bulb cover will fall if not held in place while removing wire 2. retainer. bulb cover and Remove light bulb. -///_ 3. Rep!acewitha40watt _ apphance bulb. _ 4. Replace bulb cover and secure with wire retainer. _-J//2zz._(_J_ ___/_ _ _Er_m_ 8vLBCOVER _ ) /
2. Lift up the front of the drawer. 3. Pull out to the second stop position. 4. Grasp sides and lift drawer up and out. To replace: 1. Fit the ends of the drawer glides into the rails in the range. 2. Lift up front of drawer and gently push in to the first stop position. 3. Liftdrawerupagainandpushuntildrawerisclosed.
5. Reconnect power to range. Reset clock.
Leveling Legs ACAUTION:
. Be sure the anti-tip bracket secures one of the rear leveling legs to the floor to prevent the range from accidentally tipping.
The range should be leveled when installed. If the i_ range is not level, turn the plastic leveling legs, Jll_ .'/ located at each corner of the range, untilrangej/J//_,_,(')
J ";;;'" _ RACKEr
