TEAC MF-P01
Instrukcja Obsługi

Recording tracks
4) Adjust the recording level for track 2, in the same way as shown above (see "Setting the level"). Use the LEVEL and PAN controls for track 1 to control the track 1 sound. Use the MASTER control to adjust the overall monitor level.

5) When you are ready, press the REW button to rewind the tape and press the RECORD button to start recording.

6) Press the STOP button to stop recording.

7) Press the REW button to rewind and press the PLAY button to start playback. Adjust the level and pan position of the two tracks with the LEVEL and PAN controls for tracks 1 and 2.

8) If you are not satis�ed with your recording, try again. The MF-P01 has 4 tracks. You can record two more musical tracks (another guitar part, harmony vocals, bass, etc.) to tracks 3 and 4, in the same manner described above, while monitoring the previously recorded tracks.

Mixing down tracks
After completing recording, the next (�nal) process is "mixdown". We assume that all the four tracks are recorded.

Setting up
1) Unplug the stereo headphones. NOTE When headphones are plugged in, the audio performance from the LINE OUT jacks is slightly degraded. WARNING Before making the connections below, make sure that all equipment is turned off. 2) Connect the LINE OUT jacks of the MF-P01 to the AUX IN (or TUNER IN, CD IN, TAPE IN, etc) of your ampli�er. 3) Connect the master recorder to the ampli�er appropriately (see page 6). 4) Set the ampli�er�s input source to the MF-P01 and the level volume appropriately. NOTE You may directly connect the MF-P01 LINE OUT jacks to the recorder�s line input jacks without using any ampli�er.

12

PORTASTUDIO MF-P01