Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
Number
pads
Cooktop
fan and light controls
The two switches at the bottom of the control panel control the 2-Speed Exhaust Fan and the fluorescent Cooktop Light. Press the Exhaust Fan switch to the right for HIGH, to the left for LOW and center it to turn OFF. (NOTE: If the temperatirre gets too hot around the microwave oven, the exhaust fan in the vent hood will automatically turn on or change to the HIGH sewing to protect the oven. It may stay on up to an hour to cool the oven. When this occurs, the Exhaust Fan switch will not turn the fan OFF.) Press the Cooktop Light switch to the right to turn the light ON. Press switch to the left to turn it OFF will show a colon for 5 minutes
Once you�ve touched a Command Pad to tell the oven what you want It to do. you�ll touch Number Pads to tell it.. - a time, - a Cook Power, - a food temperature.
Setting the clock
You can cook without setting the clock, but the Display after the cooklng is done, then go blank
DO THIS...
THIS HAPPENS...
The CLOCK Signal Light will come on and the Display will show a colon
1. Touch CLOCK SET.
The CLOCK Signal Light and the colon will blink once.
2.
Touch CHANGE/CANCEL Pad once.
The Display will show what numbers you touched in the order you touched them. This example shows 3 25 3. Touch Number Pads for the correct time of day.
The Display will show the time of day, and the CLOCK Signal Light will stay on.
4.
Touch START.
If you have touched In an Incorrect time such as12 65, the Display will go blank and you will hear a beep. Reset the Clock.
