PIONEER M-IS22
Instrukcja Obsługi

8 Adjusting the sound

Using the timer

Adjusting the bass, treble and balance
To help you get the sound you want you can increase or reduce the bass and treble, or change the left/right balance.
1 Press SOUND MODE (remote) to select BASS, TREBLE or BALANCE.

Setting the wake-up timer
Use the wake-up timer to set the system to switch on at any time and start playing your choice of source.
Note

If you�re using the front panel controls, press BASS, TREBLE or
BALANCE.

� The clock must be set to the correct time for the wake-up timer to work properly. (see page 12) � You cannot have the record timer and the wake-up timer set at the same time.
1 2

2

Use the � · 4 and ¢ · + buttons (remote) or the JOG dial (front panel) to adjust the sound.

For example, press TUNER to select the radio as your source.
Prepare the source.

Select the source you want played.

The bass and treble can be adjusted in the range �4 to +4; balance from Left 10 to Right 10. Note: To confirm the setting and exit immediately, you can press SET on the front panel.

For example, tune in the radio station you want to wake up to. If you�ve selected a CD or tape, make sure that it�s stopped.
3 4 Set the volume. Press TIMER/CLOCK ADJ. Turn the JOG dial until you see WAKE UP displayed. Press SET. Turn the JOG dial until you see TIMER EDIT displayed. Press SET. Set the switch-on time.

Creating wider stereo sound
The Enhance feature makes the stereo spread appear wider than it really is�useful when the speakers are close together.
1 2 Press SOUND MODE (remote) to select ENHANCE.

5 6 7 8 9

If you�re using the front panel controls, press ENHANCE.
Use the � · 4 and ¢ · + buttons (remote) to select the ENHANCE mode. � ENHANCE 1 � ENHANCE 2 � OFF (ENHANCE 0)

Use the JOG dial to set the hour, then press SET. Set the minute in the same way, pressing SET when you�re done.
10 Set the switch-off time.

If you�re using the front panel controls, press ENHANCE to select the Enhance mode. Note: To confirm the setting and exit immediately, you can press SET on the front panel.

Use the JOG dial to set the hour, then press SET. Set the minute in the same way, pressing SET when you�re done. The WAKE UP indicator lights and switch-on and switch-off times are confirmed in the display after pressing SET this last time.
1 Switch the system into standby mode. 1

Muting the sound
If you need to momentarily turn off any sound coming out of the speakers, use the MUTE button to turn the volume down to zero.
1 Press MUTE to switch off the volume.

The wake up timer will not work if the system is left on! � You can check the timer settings in standby by pressing
TIMER/CLOCK ADJ.

Turning the wake-up timer on/off
If the wake-up timer is active, it will switch on everyday at the time you have set. Here�s how to turn it on or off:
1 2 3 4 Press TIMER/CLOCK ADJ. Turn the JOG dial until WAKE UP is displayed. Press SET. Turn the JOG dial until TIMER ON or TIMER OFF is displayed.

The bass/mute indicator on the amplifier unit lights up (except UK model) and MUTE is displayed briefly. To switch the sound back on, press MUTE again.

You must have the timer set (see above) to select TIMER ON.
5 Press SET.

The WAKE UP indicator lights when the timer is active and disappears when it�s inactive.

22
En