WHIRLPOOL MTF1955ERW
Instrukcja Obsługi

Looking .__.__. .................. ........... ..... .............. ......
Shelves
Your refrigerator has either Spill-Catcher or Tempered Glass Cantilever Shelves. The Spill-Catcher'" shelves have a spill retainer edge which allows for easier clean up, and some are equipped with the Easy Glide slide out feature, I I I i To slide out (select models), grasp the front of the shelf and pull forward. Push in the shelf to return to the original position. To remove a shelf, slightly lift up the rear of the shelf and pull the shelf straight out To lock the shelf into another position, tilt up the front edge of the shelf. Insert the hooks into the desired frame openings and let the shelf settle into place, being sure the shelf is securely locked at the rear. SLIDE OUT SHELF FRAME ASSEMBL_ Some models have an adjustable Freezer Shelf: To remove the sheik lift the left end up about 3 inches; pull the right end bars out of the side wall cups. To replace the shelf, reposition the removable support plugs on the left side wall to the desired level and reverse the removal procedure. , ,
TM

In_idA

Unload the shelf completely, raise the shelf to its highest possible position. While supporting the shelf and frame from the front, press both locks inward. Lift slightly and tilt the frame assembly to allow the rear guides to clear the vertical rails. To reinstall, tilt the frame assembly while depressing both locks, reposition the rear guide behind the vertical rails. When the shelf is level, release the locks allowing VERTICAL RAILS (style,nayvary) the shelf REAR GUIDES to latch in the correct position. LOCKS

Elevator
TM

TM

Shelf

The fresh food compartment may be equipped with an Elevator Shelf. This shelf has a spillretainer edge for easy cleanup. It also has the convenient slide out feature that allows easy access to items stored at the rear of the shelf. This shelf can be adjusted up or down without having to be unloaded of its contents. To adjust an Elevator Shelf, pull out the knob on the crank handle. Rotate the crank clockwise to raise the height of the shelf, and counterclockwise to lower the height of the shelf.
TM

The Expandable-Width Freezer Shelf (select models) adjusts sideways to open up a full-height space for tall packages, such as pizza. The leg on the right side of the shelf slides to make this adjustment. The shelf can also adjust to two heights. To adjust the shelf height, remove the shelf from the freezer. Slide the leg out of the channels and reinsert the leg in the alternate height position. Return the shelf to the freezer, inserting the left end into the liner cups.

To remove the Elevator shelf for occasional cleaning, completely unload the shelf and pull the shelf forward, When the shelf stops, press up on the tabs located underneath its outside edges, then continue pulling forward, clear of the frame. the way back. (There is no need to depress the tabs for reinstallation). In ordinary use, the Elevator shelf with the frame assembly does NOT require removal. Though unlikely, and not recommended, the correct removal procedure is To follows: align the shelf to the frame and push it all as reinstall,
TM

TM

6