Loading print media
Loading paper
Follow this procedure to load paper in the multi-purpose tray:
1
Open the multi-purpose tray q, then the tray extension w.
q
w
2
Place a stack of paper (print side up) in the multi-purpose tray q and adjust the paper guide A to the width of the stack w.
� Make sure the stack does not exceed the paper limit mark B.
w
q
A B
Loading envelopes
Follow this procedure to load envelopes in the multi-purpose tray:
1 2 3
Make sure the paper thickness lever is set to the right.
� For details, see p. 3-6.
Open the multi-purpose tray, then the tray extension. Prepare the envelopes for loading: Press down firmly on the edges of the envelopes to make the folds crisp. Also, press firmly on the area that corresponds to the edges of the back flap.
