Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 26 (kliknij aby zobaczyć)
Clock - Time
The unit has an internal clock which is set automatically through RDS for absolute accuracy. A condition for correction by RDS is that an RDS transmitter with CT function (CT = clock time) is being received. Automatic correction of the time can be deactivated.
Displaying the time
The time can be displayed in radio and CD mode. Radio mode: The display can be toggled between time and frequency band (incl. memory level in the case of FM) as follows: � Press DIS for approx. 2 seconds. CD mode: You can select from three different display modes: - Track number, time - Track number, time played - CD name, track number To toggle: � Press DIS briefly.
If you wish to correct the time manually, refer to �Programming with DSC � CLOCKSET�.
Deactivating hours adjustment
Correction of the hours can be deactivated by �CLK MAN/CLK AUTO� in the DSC menu. The minutes continue to be corrected. This is useful if you wish to display the time of a different time zone, for example. If necessary: � � Press DSC briefly and Press / repeatedly until �CLK MAN/ CLK AUTO� is displayed. To deactivate hours correction, select << >> �CLK MAN�.
Setting the time
a) Automatically The time is set automatically when an RDS transmitter with the �CT� (clock time) function is being received. b) Manually by means of DSCCLOCKSET � Press DSC briefly: �CLOCKSET� appears on the display. � Press << >> to set the hours/minutes. The flashing range can be adjusted with / . � After correcting the time, press ENT briefly to save the setting.
Correcting the time following an interruption to the power supply
If the unit has been isolated from the supply voltage for a longer period, �0:00� is displayed when the power is reconnected. The time is corrected automatically by RDSCT, but can also be adjusted manually. The time need be adjusted manually only if an RDS station with CT (clock time) is not being received.
