Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 159 (kliknij aby zobaczyć)
APPENDIX B: OPTIONAL SIDE CASSETTE
Insta lling the Side Ca ssette
5* If the new paper size is legal, install the extender (see next page). 6
*
Otherwise you do not need it, and you can remove it if it is installed. Pinch and hold the side fence lock, and slide the fence to the proper size setting.
81 2
7
*
Slide the back fence to the proper size setting.
11
8* Set the dial for the proper size.
9
Bend your stack of paper (not exceeding the limit mark) and insert in the tray. Make sure the paper fits under the corners and push the side and back fence toward the paper. Note: If there is space between the paper and fences, carefully move in each fence until it is flush with the paper. Replace the cover on the cassette. Note: The bypass feed plate should be in the standard paper feed (R:out) position. If it is in, paper might not be fed properly. Only move it to the bypass feed position (in) when feeding paper manually.
