|
|
|
Kto jest w sklepie?
Sklep przegląda 6037 gości i
6 zarejestrowanych klientów |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
FIRMWARE RENEWAL MODE
1. Turn the power on and press [SELECT] button on the remote control unit to put the TV/DVD/VCR into DVD mode. Then remove the disc on the tray. (It is possible to move to F/W version up mode only when the TV/DVD/VCR is in DVD mode with the tray opened.) 2. To put the TV/DVD/VCR into F/W version up mode, press [9], [8], [7], [6], and [SEARCH MODE] buttons on the remote control unit in that order. Fig. a appears on the screen.
"*******" differ depending on the models.
the checksum will be shown in (*2) of Fig. c.
"*******" differ depending on the models.
F/W Version Up Mode VERSION : (*2) Completed SUM : 7ABC
Model No : ******* VERSION : *.** ************.ab6
Fig. c Completed Program Mode Screen
F/W Version Up Mode Model No : ******* VERSION : *.**
At this time, no button is available. 6. Remove the disc on the tray. 7. Press [SELECT] button on the remote control unit to go to TV mode, or press [POWER] button on the unit to turn the power off.
Please insert a DISC for F/W Version Up.
EXIT: SELECT
Fig. a Version Up Mode Screen
8. Press [SELECT] button on the remote control unit to put the TV/DVD/VCR into DVD mode again. 9. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order. Fig. d appears on the screen.
"*******" differ depending on the models.
The TV/DVD/VCR can also enter the version up mode with the tray open. In this case, Fig. a will be shown on the screen while the tray is open. 3. Load the disc for version up. 4. The TV/DVD/VCR enters the F/W version up mode automatically. Fig. b appears on the screen. If you enter the F/W for different models, �Disc Error� will appear on the screen, then the tray will open automatically.
"*******" differ depending on the models.
MODEL : ******* Version : *.** Region : *
EEPROM CLEAR : CLEAR F/W Version Up Mode VERSION : Reading... Model No : ******* VERSION : *.** ************.ab6
EXIT: SELECT
Fig. d
(*1)
10. Press [CLEAR] button on the remote control unit. Fig. e appears on the screen.
"*******" differ depending on the models.
Fig. b Programming Mode Screen
MODEL : ******* Version : *.** Region : * EEPROM CLEAR : OK
The appearance shown in (*1) of Fig. b is described as follows: No. 1 2 3 Appearance Reading... Erasing... State Sending files into the memory Erasing previous version data
EEPROM CLEAR : CLEAR
EXIT: SELECT
Fig. e
Programming... Writing new version data
5. After programming is finished, the tray opens automatically. Fig. c appears on the screen and
When �OK� appears on the screen, the factory default will be set. Then the firmware renewal mode is complete. 11. To exit this mode, press [CH o / p] or [SELECT] button to go to TV mode, or press [POWER] button to turn the power off. 1-9-1 T1100FW
|
|
|
> |
|
