PHILIPS MX5000D
Instrukcja Serwisowa

3-2

Dismantling of the DVD Module / shield bracket B1 1) Loosen screws D3 of botton chassis figure3.

2) Loosen 5 screws B and remove the B1. (figure 4) 3) Loosen 4 screws D (see figure 5) and 2 screws D1, then all connectors to remove the DVD module.

D1
Screw K1

Screw D3

D

Figure 3

B

B1
Figure 5

Figure 4

Dismantling the Power Amplifier Module
1) Pull out connected wires and Loosen 1 screws (see figure 6). 2) Loosen 10 screws on the Rear Panel - 4 screws K for the Speaker sockets (see figure7) - 4 screws K for the heat sink. - 2 screws K1 for the bottom chassis.(see figure 3)

Figure 6