JVC MX-J30U
Instrukcja Obsługi

English
To record on both sides � Reverse Mode
Press REVERSE MODE so that the Reverse Mode indicator lights up as � � When using the Reverse Mode for recording, start recording in the forward (3) direction first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape. To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as �

REVERSE MODE

CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play.

1 Put a recordable cassette into deck B. 2 Place a disc correctly on the circle of the disc
tray, with its label side up.
CD3

To record an AM station � Beat Cut
While recording an AM broadcast, beats may be heard (which are never heard when listening to the broadcast without recording it). If this occurs, press PROGRAM repeatedly, while PROGRAM recording, until the beats are reduced. � Each time you press the button, the display changes to show the following:
CUT1 CUT2 CUT3

3 Press one of the disc number
the disc, then 7.

buttons (CD 1 to CD 3) to select

CD2

CD1

4 Press CD REC START.
�CD REC� appears, and the indicator
CD REC START

lights up on the display. Deck B starts recording and the CD player starts playing. When the recording is done, �CD REC FINISHED� appears on the display, and the CD player and deck B stop. To stop during CD Direct Recording, press 7.

Dubbing Tapes
It is preferable that the tape type (type I or II) you record from be the same as the tape type you record onto when dubbing tapes. To remove the cassette, press EJECT 0 for deck B.

1 Press TAPE 2 3, then 7. 2 Put the source cassette in deck A, and a
recordable cassette into deck B.
� Put the cassettes in both decks so that the tapes will run in the forward (3) direction.

To record on both sides � Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator lights up as � � When using the Reverse Mode for CD Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be recorded at the beginning of the reverse side (2). If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape. To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as �

3 Press DUBBING.
Dubbing starts. To stop during dubbing, press 7.

DUBBING

To remove the cassette, press 0 EJECT for deck A and EJECT 0 for deck B.

To record on both sides � Reverse Mode
Press REVERSE MODE so that the Reverse Mode indicator lights up as � To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as �

� 17 �