Choosing program type a) with the station keys: When PTY is turned on, the station keys 1- 6 select the program types determined by the factory.
l
l
During that time you are selecting the desired program type by pressing >> (forward) or << (reverse). Press >> or <c as often as necessary.
Scanning stations with PTY scan
The display must show �PTY�. . Press the SC key. The stations that can be received and are broadcasting this program type will be briefly scanned. To turn off scan:
l
l
Press one of keys (1 - 6). The display will show the selected program type for 2 seconds.
If you would like to listen to a station broadcasting this program type, start the station search by pressing A/V. Should no station with the chosen program type be found, the display will briefly indicate �NO PTY� and you will hear a beep. The station last selected will be received. Each storage area can be used for a different available program type. Should you wish further information, you may turn to the next paragraph titled �Storing the program type�.
l
If you would like to listen to a station with a particular program type start the station search by pressing A/V. If no station with the selected program type can be found, the display will briefly indicate �NO PTY� and you will hear a beep. The last selected station will be received.
l
Press the SC key or the station search toggle switch once more.
PTY priority Storing program type
The factory has stored one program type on each of the keys 1 - 6. You may, however, store other available program types. If you would like to store a different program type, �PTY� must be illuminated in the display. l If you wish you may turn �PTY� on by pressing the PTY key. l Select the program type by pressing << >> and then press the selected key (l-6) until you hear a beep. The selected program type can be called with this key when �PTY� is illuminated in the display. Scenario: PTY is turned on; the letters appear in the display. Presently no station of the selected program type can be received (not with station search or the scan function). The unit switches back to the previous station. If the radio is on, it will switch to that station for the duration of the program as soon as a station within the station chain of the selected program type can be received. Example: - Current station: NDR 3; - �PTY� lit up in the display; - POP chosen;
b)
with the station search toggle switch << >>I When PTY is turned on, you can choose a program type by pressing.
<< >>. . Press c-z or >>. The program type
last selected will be displayed for 3 seconds.
