Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 61 (kliknij aby zobaczyć)
OPERATIONS
AND TIMING
m
0 Adjusting the AE Slope --. \
1) Remove the Test Sheet, place a newspaper on
the copyboard, and close the copyboard cover.
8) Press the SORT/GROUP key after making adjustments. 9) Press the push switch (SWl) on the adjusting PCB
2) Press the SORT/GROUP key on the control
panel. - The copier operates as in step 5) of �Adjusting the AE Reference Point.� 3) Take notes of the value shown on the copy counter of the control panel. 4) Press the SORT/GROUP key on the control panel. . The copy counter on the control panel will indicate �0�. 5) Enter �l�on the tenkey pad on the control panel. - The copy counter on the control panel will indicate �1�. 6) Press the SORT/GROUP key.
: .I7) �
3
E
VR2
AEslope
1
Turn VR2 (AE slope) on the adjusting PCB so that the value on the copy counter of the control panel is the same as the value recorded in step
VR2
Document Test Sheet density
Figure 3-34 Adjusting PCB
Newspaper
Figure 3-33
I
-2.
\
COPYAIGHT
0 KS2 CANON INC.
RNON NPZl20/2020 AN.0 MAY 1530 PAINTED IN JIIPAN IIMPAIML 1U .MPONl
