PANASONIC NRA4U2
Instrukcja Obsługi

OPERATION
1. Once plugged into an active power outlet, this appliance will begin to operate. 2. The temperature is controlled and maintained automatically.

MAINTENANCE
Light bulb replacement
1. Unplug AC cord. 2. Remove the lens (located in the upper right hand corner in the cavity). 3. Remove the lens and replace the light bulb (locally available). 4. Re-attach the lens and plug AC cord into power outlet.

Cleaning
1. Wire and door shelves are removable and should be cleaned periodically. 2. Door gasket and the cavity should be kept clean and free of food particles. 3. Use only warm water and mild liquid detergent (dishwasher type) to clean this appliance. 4. Make sure all washed surfaces are wiped dry. 5. Check the filter occasionally and if clogged with dust, clean it with vacuum cleaner or wash it with water. (Dust clogged filter will result in insufficient cooling performance.)

To clean filter
(1) Unplug AC cord. (2) Remove filter as shown. (3) Clean dust with vacuum cleaner or wash filter with neutral detergent. (4) After cleaning, re-install filter. (Make sure the stamped word "FACE" is upward.)

General notes
1. Internal fan will continue to operate as long as the appliance is plugged into power outlet and regardless of whether the door is open or not. 2. Do not use any of the following agents for cleaning this appliance: strong, alkaline, abrasive, or powder detergents, scrubbers, alcohol or petroleum based chemicals.
�5�