SHERWOOD P-965
Instrukcja Obsługi

When CD, AUX or VIDEO 1~ VIDEO 6 is selected ENGLISH

Adjusting the tone (bass and treble)
Select the tone mode as desired.

4

Select the digital or the analog input as desired.

7

STANDBY

POWER ON

AUD2
SLEEP DIMM ROOM2 D/A S.A/B SUR.B PURE

or

T.TON OSD

PARA. PAGE1

� Each time this button is pressed, the corresponding input is selected as follows:
DIGITAL ANALOG

� Each time this button is pressed, the tone mode changes as follows:
BASS TREBLE DEFEAT OFF(or ON)

� When PHONO, TUNER or TAPE MONITOR is selected as an input source, the analog input is automatically selected. Notes: � When the selected digital input is not connected, �DIGITAL� is flickering, meaning no sound.(Refer to �ENJOYING SURROUND SOUND� on page 29.) � To select the digital input, you should assign the connected DIGITAL IN to the corresponding input source. (For details, refer to �When selecting the DIGITAL INPUT SETUP� on page 51.)

� The tone display is shown for several seconds. � If the tone display disappears, press the TONE MODE button again. � ( ) : When the tone defeat function is activated (�DEFEAT ON�), bass and treble modes cannot be selected Note: � When the pure audio function is activated, the tone mode cannot be selected.

8

At the desired tone mode, adjust as desired.

5

Operate the selected component for playback.

� When playing back the program sources with surround sound, refer to �ENJOYING SURROUND SOUND� on page 29.

At the tone defeat mode, each time the MULTI CONTROL knob is rotated, the tone defeat mode changes as follows:
DEFEAT ON : When listening to a program source without the tone effect. DEFEAT OFF : When adjusting the tone for your taste.

Adjust the (overall) volume.

6
STANDBY POWER ON

PAGE

MAIN

FAV

CH. SET

or
DOWN UP

VOL

VOL

DSP

MUTE

DECODE

DSP

ADJUST

CH/

RETURN STEREO

1 4 7
DISP

2 5 8 0
M2

3 6 9
OSD/MENU ENT

At the desired tone (bass or treble), each time the MULTI CONTROL knob is rotated, the tone level can be adjusted within the range of +10~ -10 dB. � In general, we recommend the bass and treble to be adjusted to 0(flat) level. � To complete tone adjustment, repeat the above steps and . � Extreme settings at high volume may damage your speakers.

MI

M3

RNC-510

24