Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
Tape operation
Inserting a tape
� � Turn on the set. Insert a tape.
Fast winding
Fast forward � Press FF (fast forward). At the end of the tape, the set will switch to the other track and start playing it. To stop fast forward: � press FR. Fast rewind � Press FR (fast rewind). When the tape has been completely rewound, the set will start playing the same track again. To stop fast rewind: � press FF.
Switch-over to the other track Press simultaneously TR1-PLAY or TR2-PLAY on the display
Autoreverse
If, while a tape is playing, you wish to switch to the other track of that tape: � press FR and FF simultaneously. At the end of the tape, the set will automatically switch to the other track. The display will show TR1-PLAY for track 1 or A and TR2PLAY for track 2 or B. Note: If there is too much tension on the tape during playback, the set may switch to the other track by itself. In this case check the condition of the tape. Sometimes it helps to rewind the cassette tape completely.
Eject cassette
Insert cassette with side A or 1 facing up, the open side facing to the right
The tape will be played in the direction used last. If TR1-PLAY is displayed, this means that track 1 or A of the tape is played.
Tape equalisation switch for MTL
The equalisation is done automatically.
Ejecting a tape
� Press . The cassette will be ejected.
