PROGRESS PC4206
Instrukcja Obsługi

ifu 42xx press.qxd

12/5/03

1:05 PM

Page 9

PROGRESS PC 4206, 4207, 4208, 4220, 4260, 4280

MAINTENANCE REPLACING THE DUSTBAG
Always operate the cleaner with the dustbag installed. If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. After removing the flexible hose, open the front cover (fig. 19). Remove the dustbag and insert a new one (fig. 20, 21). Close the cover by pressing down until it clicks (fig. 19). Dustbag reference number: T120 / CT 120. Dustbag reference number in Switzerland: MI 06.

REPLACING THE FILTERS
The dustbag must be replaced if the window of the dustbag full indicator is completely red when the cleaner is operating at maximum power and the nozzle is raised from the floor. Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaner with filters installed to avoid reduced suction. Disconnect from electrical outlet before changing the filters. Do not use a washing machine to rinse filters. Pull dustbag upward and remove the motor protection filter (fig. 22). Rinse the filter under tap water and dry it completely. (fig. 23) Put the filter back into the cleaner (fig. 22.) Open the filter cover and remove the exhaust filter with grill. (fig. 24, 25) (PC 4206, 4207, 4220, 4260). Take the filters out of the grill (fig. 26). Rinse the filters under tap water and dry them completely. (fig. 23) Place the filters back into the grill and put it back into the cleaner. (fig. 26, 25) Close the filter cover (fig. 24). HEPA filter (PC 4208, 4280): Take out the filter with grill, and change it for a new one (fig. 25)

PROTECTING THE ENVIRONMENT
Attempt to recycle packaging material and old appliances. The cardboard packaging can be placed in the waste paper collection. Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling. Recycling the Appliance at the end of its life: The plastic components all carry a material identification marking so that, like the other materials, they can be recycled at the end of the life of the appliance. Please inquire with your local authority. Blocked air flow and dirty filters: The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 20-30 minutes. Remove blockage and/or clean filters. Restart the cleaner.

-2-