...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 249 (kliknij aby zobaczyć)
CHAPTER 9 INSTALLATION
Step 16
Work While bending the ADF auxiliary tray in the direction of arrows in the figure, insert it into the holes on the edge of the original tray. Caution: This step applies to the ADF type only.
Checks and remarks
Holes
ADF auxiliary tray
17
Slide in and out the auxiliary tray several times to make sure that it moves smoothly. Caution: This step applies to the ADF type only.
ADF auxiliary tray
18
Connect the power cord to the power cord connector.
19
Connect the power plug to the power outlet; then, turn on the power switch.
� Make sure that the AE and DIRECT indicators turn on, the count/ratio indicator indicates �1�. � Press the Count/Zoom Set key and the Clear/Stop key to check that the copy count is correct. � Press the Default Ratio key to check that different ratios are indicated. � Check to make sure that a press on the Zoom Mode key turns on the �0� indication and a press on the Count/Zoom Set key will indicate the correct ratio.
