Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 40 (kliknij aby zobaczyć)
Charging External Battery Pack
You can charge the external battery pack by connecting AC power to the computer with the external battery connected. To charge most effectively, the standard and external battery pack will be charged as follows: 1. Charge standard battery pack to 80%. 2. Charge external battery pack to 80%. 3. Charge standard battery pack remaining 20%. 4. Charge external battery pack remaining 20%. When the computer is turned off or in the suspend-to-disk mode, it will take about 5 hours and 30 minutes to charge both the standard and external battery packs from empty to full. When the computer is turned on, it will take about 7 hours and 30 minutes. (The charging time depends on the power you are consuming.)
3
Initializing External Battery Pack
The procedure for initializing an external battery pack is the same as that of the standard battery. But, you cannot initialize the external battery pack only. If you begin the initializing process, both standard and external battery packs will be initialized.
