Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
Setting up your TV
� Use the stand designed for this TV. For details of how to attach the stand, refer to the stand users manual. � Ensure that the TV is installed on the wall by a skilled installer.
Mounting the front speakers, and preparing the subwoofer
Mounting the front speakers
Mount the supplied the DD speakers on the left and right of the TV. � When using the stand designed for the TV, mount the TV on the stand beforehand. � Place a soft cloth on the floor for protection before laying the TV down to attach the front speakers.
ENGLISH
1 Loosen the speaker mounting screws at the back of the TV Using a Philips screwdriver, loosen the speaker mounting screws (three each side) until the heads project approximately 3 mm.
2 Attach the front speakers to the back of the TV Place the heads of the screws in the screw holes in the front speaker mounting fixture, and slide the speaker downwards.
3 Lock the front speakers in place Tighten the screws to lock the mounting fixture in place using a Philips screwdriver.
� Attach only the supplied DD speakers to the TV.
Preparing the subwoofer
Either stand the subwoofer vertically or lay it down on its side, peel the paper from the supplied rubber feet, and stick the feet in the four corners on the surface to be used as the base. The rubber feet prevent slipping and resonance, and also protect the speaker cord.
Subwoofer
Rubber feet
Mounting example: Subwoofer to be used lying down
� The subwoofer is not designed to withstand electromagnetic fields. Furthermore, it vibrates in operation and should therefore not be installed near equipment such as VCR, or equipment where it will be subject to vibration or electromagnetic fields.
