Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 26 (kliknij aby zobaczyć)
PDA-5001
8. PANEL FACILITIES AND SPECIFICATIONS
PANEL FACILITIES
1
2
3
�
+
AUDIO OUTPUT IN OUT IN OUT COMBINATION CONTROL RS-232C
(INPUT 4)
R SPEAKER 8 � � 16 �
R
(INPUT 3)
�
L
AUDIO INPUT
ANALOG RGB INPUT4
OUTPUT (ANALOG( RGB
4
5
6
7
8
9
0
-
1 AUDIO INPUT (Pin jacks)
Use to obtain sound when INPUT2 (BNC/S) is selected. Connect the audio output jack of components connected to INPUT2 (BNC/S) to these jacks.
7 CONTROL IN/OUT
For connection of PIONEER components that bear the � mark. Making CONTROL connection enables control of this unit as a component in a system.
2 AUDIO INPUT (Pin jacks)
Use to obtain sound when INPUT1 (BNC) is selected. Connect the audio output jack of components connected to INPUT1 (BNC) to these jacks.
8 RS-232C
DO NOT MAKE ANY CONNECTIONS TO THIS TERMINAL. This terminal is used in the factory setup.
3 INPUT1 (BNC)
For connection of components that have a composite video output jack. Use the INPUT1 OUT jack to output the video signal to an external monitor or other component. Note: The video signal will not be output from the INPUT1 OUT jack when the main power of the plasma display is off or in standby mode .
9 AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT4 is selected. Connect the audio output jack of components connected to INPUT4 to this jack.
0 AUDIO INPUT (Pin jacks)
Use to obtain sound when INPUT3 is selected. Connect the audio output jack of components connected to INPUT3 to these jacks. Note: The left audio channel (L) jack is not compatible with monaural input sources.
4 SPEAKER (R) terminal
For connection of an external right speaker. Connect a speaker whose impedance is 8 -16 �.
- INPUT4
For connection of a personal computer (PC) or similar component. Make sure that the connection made corresponds to the format of the signal output from the connected component. Use the INPUT4 OUTPUT terminal to output the video signal to an external monitor or other component. Note: The video signal will not be output from the INPUT4 OUTPUT terminal when the main power of the plasma display is off or in standby mode .
5 AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source component connected to this unit.
6 COMBINATION IN/OUT
DO NOT MAKE ANY CONNECTIONS TO THESE TERMINALS. These terminals are used in the factory setup.