PIONEER PDP-LX508A/YP
Instrukcja Obsługi

05

Preparation

Attaching and removing speed clamps
Insert [1] into an appropriate hole on the rear of the plasma television and snap [2] into the back of [1] to lock the clamp.
2 1

Connecting the power cord
(Rear view)
MONITOR OUT SUB WOOFER

DIGITAL OUT OPTICAL

� Speed clamps are designed to be difficult to undo once in place. Please attach them carefully. � Use pliers to twist the clamp 90º, pulling outward. The clamp may deteriorate over time and become damaged if removed. � Be careful not to subject any connecting cables to strain. Note � Use the speed clamps as necessary.

Power cord

Noise filter Partially eliminates noise caused by the power source. To power outlet

Tidying the speaker cables
Use the supplied bead bands as necessary to tidy the speaker cables. (Rear view) Speaker cable Note

� Disconnect the power cord from the power outlet when the plasma television is not going to be used for a long period of time. � After all other components are connected, connect the power plug to the AC outlet.

MONITOR OUT

SUB WOOFER

DIGITAL DIGITAL OUT OPTICAL

Bead band Note � When tidying up your speaker cables, make sure to bundle them so that they are not subjected to any pressure. � Disconnect the power cord from the power outlet when the plasma television is not going to be used for a long period of time.

18
En