Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 23 (kliknij aby zobaczyć)
Opening and Closing the Lens Cover
Open the lens cover when taking photographs. When not taking photographs, keep the cover closed to protect the lens.
è�îı����
Opening the lens cover
Slide the lens cover in the arrow direction.
Sliding the lens cover will allow the flash to pop up. Opening the lens cover fully and turning the power on causes the lens to extend and the camera to be initiated with the photography mode.
Closing the lens cover
Slightly slide the lens cover in the arrow direction.
Photographed Images PC Information
2 1
Following an alarm the lens will be automatically returned to the original position and the playback mode will be selected. Wait until the lens is completely returned, then close the lens cover by sliding it.1 Because the flash is not automatically returned, gently push the flash down until the latch clicks.2
Important
� Do not move the lens cover while the lens is moving. Neglecting this may cause product damage.
Note
� With the lens cover opened, you cannot lock the flash down. To return the flash to the original position, close the lens cover first. � If the camera has been connected to the PC using a USB cable, the camera is initiated with the PC mode no matter whether the lens cover has been opened or closed.
Getting Ready Taking Photographs Playing Back/ Deleting Connecting to the Other Useful