When shipped from the factory, the order of the wing screw and washer was the reverse of that shown here. Be sure to attach them in the order shown in the illustration at left.
Adjust the stand height ����� ��調�
3. Attach the pad. Turn the pad until the screw is just about all the way in; then stop, and tighten the wing screw from underneath the stand.
Do not forcefully try to turn the pad after the screw is already all the way in. Doing so may damage the stand's screw.
Pad attachment screw size : M8 ������� ��寸��M8
Adjust the tripod spread ����� �調�