Jam at C
1 Remove the Fuser: a b Open the printer�s front door. Turn the small blue thumbscrew counterclockwise to unlock the Fuser. Press the safety catch and slide the Fuser out of the printer.
28
The Fuser is hot. To avoid personal injury, use caution or wait for it to cool before touching it.
1 a b c
c
2
Remove the Fuser Roll: a b Press out on the two tabs to unlock the Fuser Roll. Lift the Fuser Roll out of the Fuser and set it aside.
2 a b 3 4
33100-12
3
Turn the Fuser�s large blue knob clockwise or counterclockwise to release the jammed media.
4
Remove the jammed media from the Fuser.
5
Re-insert the Fuser Roll into the Fuser; re-install the Fuser.
