SANYO PLC-XT11
Instrukcja Serwisowa

Optical Adjustments

Condenser Lens adjustment 1 Turn the projector on by a state of without FPC cables. 2 Adjust the adjustment base of condenser lens ass�y to make color
uniformity in white. 1) If the shading appears on the left or right of the screen as shown in Fig.2-1, loosen 2 screws A with the 2.0mm hex driver, and adjust the slot B to make color uniformity in white by using a slot screwdriver. 2) If the shading appears on the top or bottom of the screen as shown in Fig.2-2, loosen 2 screws C with the 2.0mm hex driver, and adjust the slot D to make color uniformity in white by using a slot screwdriver 3 Tighten screws A and C to fix the Condenser lens unit. Note: The relay lens adjustment must be carried out after completing this adjustment. a White b

b a B A

Fig.2-1
Moving of Slot B

A

x White y

C x C y D

Fig.2-2
Moving of Slot D

-21-