INFINITY PRELUDE MTS STAND
Instrukcja Obsługi

Installing the Tower onto the Floor Stand

STEP 1 � When using the tower as a surround speaker,
set Toggle Switch in tower cup to �Full Range.�When using as a front channel,set Toggle Switch in tower cup in bottom to the �Full Range�position.Please consult the Prelude MTS Subwoofer manual for exceptions to this setting.

STEP 3 � Insert double-ended Audio Banana Plug into tower
as shown.

STEP 2 � Screw alignment pins into cup in bottom of tower.
Use two per tower. Screw threaded ends into holes and tighten until snug.DO NOT overtighten.

STEP 4 � To add greater stability to the tower stand,add
sand (not included) in the plastic bag provided in the tower base. Turn the base upside-down and remove the (3) 1/4-20 Phillips screws holding the foot onto the base.

2

PRELUDE MTS-STAND