PIONEER PRO-1000HDI/LUCXC
Instrukcja Obsługi

Part Names and Functions

Remote Control Unit
1 SCREEN SIZE button
Press to select the screen size (page 24).

1 2

7 8 9

2 INPUT buttons
Use to select the input (page 22).

3 MENU button

Press to open and close the on-screen menu (pages 18 to 34).

4 ADJUST (5/�/3/2) buttons
3 4 5 0
Use to navigate menu screens and to adjust various settings on the unit. Usage of cursor buttons within operations is clearly indicated at the bottom the on-screen menu display (pages 18 to 34).

5 SET button

Press to adjust or enter various settings on the unit (pages 18 to 34).

6 MUTING button
6 Press to mute the volume (page 23).

7 AUTO SET UP button
When using computer signal input, automatically sets the POSITION and CLOCK/ PHASE to optimum values (page 28).

8 STANDBY/ON button
Press to put the unit in operation or standby mode (page 22).

When handling the remote control unit
¶ Do not drop or shake the remote control. ¶ Do not use the remote control unit in a location subject to direct sunlight, heat radiation from a heater, or in a place subject to excessive humidity. ¶ When the remote control unit�s batteries begin to wear out, the operable distance will gradually become shorter. When this occurs, replace all batteries with new ones as soon as possible.

9 DISPLAY button
Press to view the unit�s current input and setup mode (page 23).

0 POINT ZOOM button
Use to select and enlarge one part of the screen (page 25).

- VOLUME (+/�) buttons
Use to adjust the volume (page 23).

Inserting the batteries in the remote control unit
While pressing down lightly, slide in the direction of the arrow.

Two AA (R6) batteries

¶ Insert batteries so that the plus (+) and minus (�) sides are aligned according to the markings in the battery case. ¶ Do not mix new batteries with used ones. ¶ The voltage of batteries may differ even if they are the same shape. Please do not mix different kinds of batteries together. ¶ When not using the remote control unit for a long period of time (1 month or more), remove the batteries from the remote control unit to prevent leaking of battery fluid. If battery liquid has leaked, thoroughly wipe the inside of the case until all liquid is removed, and then insert new batteries. ¶ Do not charge, short, disassemble or throw the provided batteries in a fire. When disposing of used batteries, please comply with governmental regulations or environmental public instruction�s rules that apply in your country or area.

CAUTION

H048 En

5
PRO-1000HDI / PRO-800HDI

Part Names and Functions