Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 99 (kliknij aby zobaczyć)
Useful Remote Control Features
Manufacturing Reset
All learned and preset codes can be returned to the factory defaults regardless of the mode.
14
1 Press EDIT/LEARN and TV a at the same time. The Mode
switch setting is ignored. � The LED indicator flashes and the remote control unit enters the Manufacturing Reset mode.
2 Press D (yellow) to reset the remote control.
� The manufacturing reset is complete. The LED flashes for one second then the remote control unit returns to normal operation.
Note
� To exit the Edit mode before it is complete, press EDIT/LEARN again. � If the Mode switch selection is changed when in the Edit mode, the Edit session is canceled. � If no operation is performed within one minute, the Edit session is canceled. � When you enter an unlisted code, the LED flashes repeatedly. � If the tables on pages 100 to 104 do not include your device�s manufacturer or the remote control does not work, use the Learn mode. � The initial mode is �PIONEER�. � When using any of the receiver buttons (a, INPUT, or VOL +/ �) to cancel the Learn mode, follow the procedure with the Mode switch set to �TV�. You cannot cancel the mode otherwise. � You may not be able to partially or entirely control some equipment in the tables.
