Schematy są ale można wysilić się i zrobić kolorowy skan i o większej rozdzielczości. Wtedy schematy płytek będą czytelniejsze. Całość super jako wartość merytoryczna. Wszystkie dane potrzebne do podłączenia różnego rodzajów urządzeń takich gramofon, CD itd.
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Tekstowy podgląd strony 163 (kliknij aby zobaczyć)
1
2
3
4
2 Actual Vofs adjustment (1)
A
(From 1 )
(Check Vofs_max1 with the red 760 signal.) Perform aging with RST MASK 01 (white) displayed for 3 seconds: MKS S51
Set to RST MASK 17 (pale purple).
MKS S67
Set VOL OFFSET to 024 (15 [V] ).
B
VOF 024
Are there any dark cells? Yes Gradually increase Vofs data VOF ��� until dark cells disappear (Vofs should be 255 (60 [V]) or less).
No
Set Vofs_min1 to 024 (15 [V]).
Note: This setting value becomes the value for Vofs_min1.
Vofs_min1
[STEP]
Note: Take note of the value for Vofs_min1.
Is Vofs_min1 144 (38 [V]) or smaller?
C
No
Replace the panel again or abnormality in circuits
Yes
Return the Vofs value to the tentative voltage setting.
VOF ���
Note: for checking the lower limit of Vofs accurately. This is
(Check Vofs_min2 with the sky color signal.) Perform aging with RST MASK 01 (white) displayed for 3 seconds: MKS S51
D
Set to RST MASK 16 (sky color).
MKS S66
Set VOL OFFSET to 024 (15 [V] ).
VOF 024
Are there any dark cells? Yes Gradually increase the Vofs data until dark cells disappear (Vofs should be 255 (60 [V]) or less).
E
No
Set Vofs_min2 to 024 (15 [V]).
VOF ���
Note: This setting value becomes the value for Vofs_min2.
Vofs_min2
[STEP]
Note: Take note of the value
Is Vofs_min2 144 (38 [V]) or smaller? Yes
No
Replace the panel again or abnormality in circuits
for Vofs_min2.
Return the Vofs value to the tentative voltage setting.
Note: This is for checking the lower limit of Vofs accurately.