PANASONIC PT61DLX26
Instrukcja Obsługi

Theater Speaker
You can control the theater speaker with this unit�s Remote Control. �Home theater� with speaker icon appears when a Panasonic �Control with HDMI� home theater system is connected via the HDMI1 input. Pressing the OK button toggles between TV and home theater volume control.
� �Ctrl with HDMI� must be set to �On�. � Limited to newer Panasonic Home Theater, RAM theater and DIGA/DVD models with �Control with HDMI�.

One-touch Theater Playback
If the �ONE TOUCH PLAY� key is pressed on the AV amp or Player theater Remote Control, the following sequence of operations is performed automatically. 1. Home theater/Player theater power switches On and playback begins. 2. TV power switches On and the playback screen is displayed. 3. Audio is muted on the TV and switches to theater.

1

Press to select �Home theater� or �TV speakers�.

Prog-out stop
When connecting external equipment to this unit - Stops output of the picture and sound signals at the AV OUT jacks for the input source selected in this menu to avoid signal loop.

Press to activate the Home theater or TV speakers.
Menu
Home theater Picture Audio Timer Lock TVG / Photo Setup

Menu
TV speakers Picture Audio Timer Lock TVG / Photo Setup

1

Press to select �Other adjust�.

Press to display the Other adjust menu.
Setup
Other adjust About Reset

Adjustment for Panasonic Amplifier, Panasonic

Home theater:

2

Player theater, Panasonic RAM theater. Press for desired volume level.

Press to select �Prog-out stop�. Press to select �Off�, �Comp. 1�, �Comp. 2�, �HDMI 1�, �HDMI 2�, �Video 1�, �Video 2�, or �Video 3�.

Press to mute the sound.

Other adjust Prog-out stop Ctrl with HDMI Power off link Power on link

Off On Set No

Advanced Op er a tion

TV speakers:
The TV speakers are active. Notes:
� Selecting �Home theater� mutes TV speaker sound. � When �Home theater� is selected, the home theater volume control can be raised or lowered with the TV remote volume button. The TV displays �Home Theater + / -� on screen. � If home theater/RAM theater/Player theater is currently off, selecting the �Home theater� option will automatically turn the equipment on. � Turning off home theater/Player theater/RAM theater automatically switches unit to TV speakers.

Notes:
� The input signals connected to the terminal selected in �Prog-out stop� menu cannot be output from AV OUT terminals (both picture and audio). � When recording with a VCR using TV Guide, set �Prog-out stop� setting to the terminal connected the VCR. � The Prog out will not output picture but can output only sound if the input is either Component or HDMI and when �Prog-out stop� is set to �Off� or other inputs.

69