Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
Setting up
Lens shift and positioning
If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position by moving the Lens shift dials within the shift range of the lens.
Adjusting the Lens shift dials Getting Started
Horizontal shift
You can place the projector where the projector lens is up to 40% horizontally off-center from the screen and then adjust the image position with the Lens shift dial � Horizontal.
Up to about 40% Up to about 40% of the projection of the projection
Screen
Turning the dial clockwise: Moving to screen�s right Vertical shift
Turning the dial counterclockwise: Moving to screen�s left
You can place the projector where the projector lens is up to 100% vertically off-center from the screen and then adjust the image position with the Lens shift dial � Vertical.
Turning the dial counterclockwise: Moving to screen�s bottom
Up to about 100% of the projection Up to about 100% of the projection Screen Turning the dial clockwise: Moving to screen�s top
