Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 33 (kliknij aby zobaczyć)
Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording.
Adjusting the Sound Volume
To adjust the volume, push the [W/T] Lever 24 to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
1 Set the [OFF/ON] Switch 40 to [ON].
� The [POWER] Lamp 37 lights up.
40 37
24
2 Set the Mode Dial 36 to Tape Playback Mode.
36
To adjust the volume with the Remote Control, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
3 Press the [ tape.
16
] Button 16 to rewind the
� The sound volume cannot be adjusted using the Remote Control in Playback Zoom Mode. (pp. 35-36) � For other notes concerning this item, see page 59.
� Rewind the tape to the point where you want to start playback. � When the tape reaches the beginning, rewinding stops automatically.
Finding a Scene You Want to Play Back
Cue/Review Playback
16 13
4 Press the [�] Button 14 to start playback.
� The [
14
] Indication appears.
If the [ ] Button 13 or [ ] Button 16 is pressed during Playback, it turns to Cue Playback A or Review Playback B .
� If a cassette recorded with copyright protection signal is played back, the picture is distorted by mosaic-like patterns.
A B
To Stop Playback Press the [ ] Button 15 .
� If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.
