Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Introduction
Mounting
O ri ent at ion
Both fixtures can sit on stage or be mounted on a truss using a clamp in any position, provided, there is adequate room for ventilation.
W ar nin g
It is important never to obstruct the fan or vents pathway. � When selecting installation location, take into consideration lamp replacement access and routine maintenance. � Safety cables should always be used. � Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. � The fixture must have a minimum of 1 meter distance from combustible materials.
1 2
1. Clamp 2. Fixture Yoke 3 3. Angle Adjustment
Rigg ing
The fixture includes a mounting yoke to which 1 rigging clamp can be bolted. 1. Align the clamp screw with the center hole on the yoke and tighten. 2. Verify the structure can hold 10 times the weight of all to-be installed fixtures. 3. Adjust the angle on the yoke arm as necessary.
