SHARP R653M
Instrukcja Obsługi

R-653M O/M & C/B

10/03/2000

10:10

Page 7

BEFORE OPERATION
Plug in the oven. 1. The oven display will flash: 2. Press the STOP/CLEAR key. 3. The display will show: To set the clock, see below. When using the oven for the first time: Heat the oven using GRILL mode without food for 20 minutes. See note on page 9.

1.
STIR TURN KG�LB GRILL MICRO COOK

2.

STOP
CLEAR

3.
STIR TURN KG�LB GRILL MICRO COOK

SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock: 1. To set the 12 hour clock, press the AUTOSTART/CLOCK key once, will appear in the display. 2. To set the 24 hour clock, press the AUTOSTART /CLOCK key twice, will appear in the display. To set the time of day: Example: To set the 12 hour clock to 12:35: 1. Select the 2. To enter the hours 12-hour clock. press the 10 MIN key once.

AUTO START CLOCK AUTO START CLOCK

x1

x2

3. Then the 1 MIN key twice.

4. To change from hours to minutes press the AUTOSTART/CLOCK key once.

AUTO START CLOCK
x1 5. To enter the minutes press the 10 MIN key 3 times.

10min.
x1 6. Then press the 1 MIN key 5 times.

1min.
x2 7. To start the clock press the AUTOSTART/CLOCK key once.

AUTO START CLOCK
x1

Check the display:

10min.
x3

1min.
x5

AUTO START CLOCK
x1

STIR TURN KG�LB GRILL MICRO COOK

NOTES: 1. To check the time of day during a cooking process, press AUTO START/CLOCK key and the time of day will remain on the display as long as you keep your finger on the key. This does not affect the cooking process. 2. If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will only show when cooking is complete. 3. If the electrical power supply to your microwave oven is interrupted, the display will intermittently show: after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased. 4. When you want to reset the time of day, follow the above example again.

7