Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
To replace: 1. Fit the door hinges into corner slots on the oven
frame.
2. Push the hinges straight in while lifting the door
slightly.
3. When hinges snap into place, open the door and rotate the Broil Stop clips to uncover the door hinge slots. Close the door.
Model
RB220PXY:
To remove: 1. Open the door to the first stop position. 2. Hold the door at both sides and lift it at the same angle it is in. 3. To replace, fft the bottom corners of the door over the ends of the hinges. Push
the door down evenly. The door will close only when it is on the hinges correctly.
Removing
the oven window
(model RB1005XY) If your oven has an oven window instead of the black glass door, the outer glass and frame can be removed for cleaning. Do not take apart a black glass door.
To remove
the outer
window:
1. Turn off all controls. With the door closed, remove the screws from the top
of the outer window frame.
2. Slightly tip the window and frame out from
the top.
3. With both hands, lift up on both sides of the
frame.
To replace
the outer
window:
1. Fit the bottom tabs of the frame into the
bottom of the window opening.
2. Push the top of the frame into place while
pushing down.
