1-1-7. Fan 1. Peel off the tape (1). 2. Disconnnect the connector (2). 3. Remove four screws (3) and the fan (4). Note: � After replacing the fan (4), attatch the tape (1) as it was.
Wire (5)
Pass the wire (5) underneath the folded part. Wire (5) Fan (4)
Acrylic board
Screws (3)
Tape (1)
Connector (2)
Fig. 2-1-7
1-1-8. Rear Panel 1. Remove twelve screws (1), then remove the rear panel (2).
Rear panel (2) Screws (1)