...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 146 (kliknij aby zobaczyć)
Operating Instructions
Recording
Media
Signal type
Copy-Free O
Copy-Once -
Copy-Never -
DVD-RW(Ver.1.1) DVD-RW(Ver.1.1) with CPRM VR mode V mode DVD-R DVD-RAM(Ver.2.0)
Recording the current TV programme you are watching
O O O O
O*
-
O*
Check that the disc has enough available space for the recording. Adjust the recording mode.
* Once �Copy Once� has been recorded, recording
cannot be done anymore.
- Content Protection for Recordable Media (CPRM) CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some HDD & DVD RECORDERs, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA. When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc. If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.
1
Press the HDD or DVD button. If you select DVD, press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display. If an unused DVD-RAM disc is used, you will be prompted to format first. Make your selection using the � � buttons, then press OK button. (See page 77.)
Unformatted Disc Do you want to format this disc? Yes No
If an unused DVD-RW disc is used, whether to initialize or not will be asked first. Make your selection, then press the OK button. (See page 77.)
Uninitialized Disc Do you want to initialize this disc? Yes No
2
Press the PROG ( ) or number buttons to select the current programme you want to record.
