M-AUDIO REVOLUTION71
Podręcznik Użytkownika

Solo - By pressing this button, you will only send sound to the selected channel.The Solo function is useful if you think the left and right speakers are reversed, for example.You can solo more than one channel at a time, if you wish. Mute - Use this button to stop audio from going to this speaker. Test - This button sends a test tone to the selected speaker. It is useful for determining where the speaker is located and how loud the volume is, relative to other speakers.
NOTE: DirectX 8.1 is required for the test tone function to work. DirectX 8.1 is supplied on the Applications CD included with your Revolution. In the DirectX folder on the Applications CD, simply double-click dxsetup.exe to install DirectX 8.1.

Output Mixer Tab This tab provides level controls for each of the speaker outputs on the Revolution. Use these controls to change the balance between speakers in your system.

Level - Move the level fader up or down to change the volume of any of the eight speaker outputs. For proper DVD playback, each of the surround speakers should play back at the same volume, but you may need to adjust them for distance or to taste. Each level control has a level meter next to it, so you can see how much signal is going to each of the outputs. Solo - By pressing this button, you will only send sound to the selected channel.The Solo function is useful if you think the left and right speakers are reversed, for example.You can solo more than one channel at a time, if you wish. Mute - Use this button to stop audio from going to this speaker.
19